Service

Diemech Turbines provides all the basic services needed for engines and propellers. These services include IRAN (inspect and repair as necessary) on Walter M601 Turbines for the experimental market which consists of the following procedures:

Before                              After
022 repair-002-040
Repair work done to compressor nozzle guide vanes (stator) that were damaged from high temperatures from starts or prolonged operation at high temperatures.
Most 1500 hour turbines need repairs done to the guide vanes.


During Repair                   After Repair
repair-001-039 repair-002-040

repair-003-041 repair-004-042

repair-005 repair-009 repair-010

  Common IRAN procedure for Turbines:
•   Dismantle, clean and inspect turbine
•   Repair and replace compressor blades 1st and 2nd stage
•   Repair inner combustion chamber
•   Nickel and ceramic coat inner combustion chamber
•   Repair outer combustion chamber stator supports
•   Machine outer combustion chamber
•   Repair diffuser manifold and machine
•   Repair stator, nickel and ceramic coat
•   Replace compressor turbine blades as necessary
•   Assemble turbine shaft complete and balance through three stages
•   Inspect power turbine, replace blades as necessary and balance
•   Replace compressor turbine bearing
•   Replace compressor thrust bearing
•   Replace deflector plate when necessary
•   Replace thermocouples as necessary
•   Sonic clean all screen filters
•   Dismantle, clean and inspect pressure and bypass valves
•   Check reduction and auxiliary gearbox
•   Dismantle, replace bearings and parts as necessary
•   Remove corrosion from gearboxes - Prime and paint
•   Assemble turbine complete
•   Inspect starter generator, replace starter generator brushes and bearings as necessary
•   Adjust FCU and prop governor as necessary
•   Test run 2 hours at different power settings
•   of  turbine
         

The advantage of buying a Diemech Turbine with IRAN:

  • 100 HOUR GUARANTEE or 1 YEAR on Turbine, Fuel control unit and prop governor.
  • FREE INSTRUCTION on all systems including start, shut downs and maintenance.
  • FREE LOANER turbine available while turbine is undergoing IRAN.
  • TWO WEEKS turn-around.

Currently we have engines with 1500 hours or less to 4500 hours available, price ranging from $41,500 to $49,500.

Diemech Turbines standard IRAN is $22,500 plus replacement parts.


home  engine  propeller  accessories  service  conversion  engine operation  faq  news contact us email
Diemech Turbine Solution, Inc.
1360 Diemech Turbine Solution, Inc.
1360 Flightline Blvd.
DeLand,Florida 32724 USA
Phone: 1-386-736-4169

 Fax: 1-386-736-6303
info@diemechturbines.com

All Right Reserved
Diemech Turbine Solution, Inc. © 2000, 2006, 2007